Show Trip Statistics In The Centre Display - Volvo S90 Owner's Manual

INSTRUMENTS AND CONTROLS
||
NOTE
In addition to in the trip computer, these units
are also changed in Volvo's navigation sys-
tem*.
Related information
•
Trip computer (p. 159)
•

Show trip statistics in the centre display

(p. 162)
•
Using the application menu in the driver dis-
play (p. 102)
The figure is schematic, the layout may vary depending on selected unit standard or updated software.
68
162
Show trip statistics in the centre
display
Trip statistics from the trip computer are dis-
played graphically in the centre display and pro-
vide an overview that facilitates more fuel-effi-
cient driving.
Open the Driver performance
app in app view in order to
show the trip statistics.
Each bar in the diagram sym-
bolises a distance of 1, 10 or
100 km, alternatively miles. The
bars are filled in from the right as driving pro-
gresses. The bar on the far right shows the value
for the current distance.
The average fuel consumption and total driving
time are calculated since the last time the trip
statistics were reset.
68
Trip statistics from the trip computer
Settings for trip statistics
Press Preferences to
•
change graph scale. Select resolution 1, 10
or 100 km/miles for the bar.
•
reset data after every trip. Performed when
the car has been stationary for more than 4
hours.
•
reset data for the current trip.
Trip statistics, calculated average consumption
and total driving time are always reset simultane-
ously.
Change unit
Change the unit for mileage, fuel consumption,
etc. via the centre display as follows:
* Option/accessory, for more information, see Introduction.
.