DRIVER SUPPORT
Managing speed for the speed
limiter
The speed limiter (Speed Limiter - SL) can be
set to different speeds.
NOTE: The illustration is schematic - details may vary
depending on car model.
–
Change the stored maximum speed with
short or long presses on the steering wheel
button
(1) or - (3):
•
Use short presses to adjust +/- 5 km/h
(+/- 5 mph) with each press.
•
Hold the button depressed to adjust
+/- 1 km/h (+/- 1 mph) and release
when the driver display's marking (4)/(6)
is at the desired speed.
> The speed set after the last press is
stored in the memory.
266
Related information
•
Speed limiter* (p. 264)
•
Activating and starting the speed limiter
(p. 265)
•
Deactivating/reactivating the speed limiter
(p. 266)
•
Switching off the speed limiter (p. 267)
Deactivating/reactivating the speed
limiter
The speed limiter (Speed Limiter - SL) can be
temporarily deactivated so that it is set in the
standby mode and can be reactivated later.
NOTE: The illustration is schematic - details may vary
depending on car model.
Deactivate the speed limiter and set it
in standby mode
–
Press the steering wheel button
> The speed limit markings and symbols in
the driver display change colour from
WHITE to GREY - the speed limiter is now
temporarily deactivated and the driver can
exceed the maximum speed setting.
* Option/accessory, for more information, see Introduction.
(2).