Table of Contents
Advertisement
2. BitStorm 1900 Installation and Testing
2-102
Step
Procedure
NOTE: The browser application must be configured for "no proxies." Refer to
"Chapter 3. BitStorm 1900 Maintenance" on page 103 for more
information."
7.)
In the browser application, enter the IP address of a known,
working site on your network or on the Internet. Repeat this step for
several sites.
8.)
Once data connectivity has been established in step 7, verify dial
tone again on the room phone.
9.)
If the voice or data connectivity fails, refer to "Chapter 3. BitStorm
1900 Maintenance" on page 103.
STOP
<RX KDYH FRPSOHWHG WKLV WDVN
BitStorm 1900 Installation and Maintenance Guide
(continued)
1900-A2-GN20-00
Advertisement
Table of Contents
