Siemens SICAM MIC System Description page 21

System Overview
Features and Functions
·
Installation on DIN rail
·
6 digital inputs
─ One common return
─ Signal voltage 24...60 VDC
─ The states of the inputs are indicated by LEDs
·
2 relay outputs
─ 1 command output
─ 1 selectable output (command output, watchdog indication or error indication)
─ With command output, the state of the output is indicated by LED
·
In addition up to 8 I/O modules
·
Communication alternatively via the following interfaces:
─ Ethernet (TCP/IP) for LAN/WAN connections acc. to IEC 60870-5-104 (only CP-6040)
─ RS-232 for multi-point or dial-up traffic acc. to IEC 60870-5-101 with an external data
transmission facility
·
Parameter settable telecontrol functions with or without time tagging
·
Central processing functions
·
Application program for open-/closed-loop control functions
·
Decentral archive (DEAR)
·
Engineering, diagnostic, and test using webbrowser
·
Storage of parameters and application program on SIM card
·
Loadable firmware
·
Function and failure indication via LED
·
Power supply 24 VDC up to 220 VDC (depending on power supply module)
Product Overview
Type
CP-6020
CP-6040
CPC60
SIM card
SICAM RTUs, SICAM MIC System Description
MC6-054-2.00, Edition 07.2014
Designation
Master control module V.28, 8 Modules
Master control module ET10TX/V.28, 8 modules
Firmware Central Processing and Communication
Memory card for application data and firmware
Power
800 mW
800 mW
21