Problems Check List - SUNWIND 420128 Instruction Manual

PROBLEM
Burner will not light
burner injector.
your gas supplier.
Burner flame goes off immediately Low gas pressure
your gas supplier.
after ignition
Delayed ignition
main burner ports.
pressure
Inadequate combustion on burner Not enough air.
dirt and debris, and
compressed air.
Burner flame is low
burner injector.
Emitter glows uneven
replace burner injector
level surface.
cylinder with a new cylinder.
Slight smoke and odor during

PROBLEMS CHECK LIST

PROBABLE CAUSE
Burner injector clogged.
Low gas supply pressure.
Main burner carry over ports clogged. Clean
Blockage in burner injector
Blockage in burner injector
Base is not on a level surface
Low gas pressure
Residue from manufacturing
SOLUTION
Low gas
Supply hose is bent or twisted
Clean or replace
Place heater on a
Clean
Call
Call
supply
Check air
passageways
and
burners for
clean with
Straighte
n hose
and
perform
leak test
on hose.
Clean or
Replace
Will
58