Assembly Procedures - SUNWIND 420128 Instruction Manual

Reflector 813 mm with 6 pcs washers .8 mm and 3 pcs M8 castle

nuts
3 pcs 90 mm pins for reflector support

4 pcs bolts M6 x 10 mm for assembly post and burner

6 pcs bolts & nuts M6 x 30 mm for post and post brackets

3 pcs bolts M8 x 16 mm for post brackets and base

This appliance required regulator that is defined under the GAS
REQUIREMENTS, or check with your gas supplier
WARNING

ASSEMBLY PROCEDURES

50