Heater Assembly - SUNWIND PH08 Instruction Manual

HEATER ASSEMBLY

Tools Required:
1 Phillips head screwdriver, 1 adjustable spanner
20. Take the control box(2) and the
plate cover(7) out off the
middle plate(1) by unscrew the
screws(17)
22. Connect 4 upper supports (5) to
the lower supports (4) and fixed
by screws(17), then fix the
upper plate(6) to 4 upper
supports(5) by screws(17).
21. Connect and fix the 4 lower
supports(4) to bottom
plate(3) and middle plate(1)
by the screws(17)
23. Fix the plate cover(7) onto
the middle plate(1) by
screws(17).
49