Floor Shift Boot; Removal; Installation; A-Pillar Trim - Dodge Dakota Sport 2001 Service Manual

AN
FLOOR SHIFT BOOT (Continued)
(5) Lift the boot/bezel assembly off of the floor
panel and over the gear shift (Fig. 2) and (Fig. 3).
Fig. 1 Shift Knob Insert
1 - KNOB
2 - KNOB INSERT
3 - SHIFT BOOT
4 - FLOOR PAN
5 - TRANSFER CASE LEVER
6 - CARPET
7 - PLATE
8 - GEAR SHIFT
Fig. 2 Shift Boot—Manual Transmission
1 - KNOB
2 - KNOB INSERT
3 - SHIFT BOOT
4 - FLOOR PAN
5 - CARPET
6 - PLATE
7 - GEAR SHIFT
Fig. 3 Shift Boot—Transfer Case
1 - KNOB INSERT
2 - KNOB
3 - TRANSFER CASE SHIFT LEVER
4 - FLOOR PAN
5 - PLATE
6 - BEZEL
7 - TRANSFER CASE SHIFT BOOT
INSTALLATION - FLOOR SHIFT BOOT
(1) Position shift boot/bezel assembly on gear shift.
(2) Press shift boot/bezel onto the floor panel.
(3) Push knob onto gear shift.
(4) Install nut attaching shift knob to gear shift.
(5) Press insert into shift knob.

A-PILLAR TRIM

REMOVAL

(1) Remove A-pillar grab handle, if equipped.
(2) Remove screws from cowl trim cover.
(3) Remove cowl trim cover.
(4) Grasp A-pillar trim and pull outward to disen-
gage clips attaching A-pillar trim to A-pillar (Fig. 4).
(5) Separate A-pillar trim from vehicle.

INSTALLATION

(1) Position A-pillar trim at A-pillar, align clips
and press into place.
(2) Install cowl trim cover.
(3) Install A-pillar grab handle, if equipped.
INTERIOR 23 - 111