23 - 118
INTERIOR
REAR VIEW MIRROR
REMOVAL
(1) Loosen the mirror base setscrew (Fig. 19).
(2) Slide the mirror base upward and off the
bracket.
Fig. 19 Rearview Mirror
1 - MIRROR
2 - SUPPORT BUTTON
INSTALLATION
(1) Position the mirror base at the bracket and
slide it downward onto the support bracket.
(2) Tighten setscrew to1 N·m (9 in. lbs.) torque.
SHIFT BEZEL
REMOVAL
(1) Remove shift boot/s.
(2) Lift bin cup holder and remove bolts attaching
shift bezel to floor pan (Fig. 20).
(3) Remove screw under shift boot attaching patch
plate to floor pan.
(4) Disengage 4WD shift indicator lamp connector,
if equipped (Fig. 21) and (Fig. 22).
(5) Separate shift bezel from vehicle.
INSTALLATION
(1) Position shift bezel in vehicle.
(2) Engage 4WD shift indicator lamp connector, if
equipped.
Fig. 20 Shift Bezel 4x2
1 - SHIFT BEZEL CUP HOLDER
2 - SHIFT BEZEL 4 x 2
3 - PATCH PLATE
Fig. 21 Shift Bezel 4X4 Manual Trans
1 - SHIFT BEZEL CUP HOLDER
2 - SHIFT BEZEL 4 x 4
3 - PATCH PLATE
(3) Install screw under shift boot attaching patch
plate to floor pan.
(4) Install bolts in cup holder attaching shift bezel
to floor pan.
(5) Install shift boot/s.
AN