Enterasys b5 Manual page 577

Parameters
vlan vlan‐id
Defaults
If vlan vlan‐id is not specified, IRDP information for all interfaces will be displayed.
Mode
Global configuration: B5
Exec mode: B5
(su)‐>router#
Example
This example shows how to display IRDP information for the VLAN 1 interface:
B5(su)->router#show ip irdp vlan 1
Interface vlan 1 has router discovery enabled
Advertisements will occur between 450 and 600 seconds
Advertisements are sent with broadcasts
Advertisements are valid for 1800 seconds
Default preference will be 0
(Optional) Displays IRDP information for a specific VLAN. This VLAN
must be configured for IP routing as described in "Pre‐Routing
Configuration Tasks" on page 18‐1.
(su)‐>router(Config)#
show ip irdp
Enterasys B5 CLI Reference 20-15