Show Spantree Stats - Enterasys b5 Manual

For information about...
set spantree protomigration
show spantree spanguard
set spantree spanguard
clear spantree spanguard
show spantree spanguardtimeout
set spantree spanguardtimeout
clear spantree spanguardtimeout
show spantree spanguardlock
clear/set spantree spanguardlock
show spantree spanguardtrapenable
set spanstree spanguardtrapenable
clear spanstree spanguardtrapenable
show spantree legacypathcost
set spantree legacypathcost
clear spantree legacypathcost
show spantree autoedge
set spantree autoedge
clear spantree autoedge

show spantree stats

Use this command to display Spanning Tree information for one or more ports.
Syntax
show spantree stats [port port-string] [sid sid] [active]
Parameters
port port‐string
sid sid
active
Defaults
If port‐string is not specified, Spanning Tree information for all ports will be displayed.
If sid is not specified, information for Spanning Tree 0 will be displayed.
If active is not specified information for all ports will be displayed regardless of whether or not
they have received BPDUs.
(Optional) Displays information for the specified port(s). For a detailed
description of possible port‐‐string values, refer to "Port String Syntax Used
in the CLI" on page 7‐1.
(Optional) Displays information for a specific Spanning Tree identifier. If
not specified, SID 0 is assumed.
(Optional) Displays information for ports that have received STP BPDUs
since boot.
show spantree stats
Refer to page...
9-24
9-25
9-25
9-26
9-27
9-27
9-28
9-28
9-29
9-29
9-30
9-30
9-31
9-31
9-32
9-32
9-32
9-33
Enterasys B5 CLI Reference 9-5