Show Netstat Output Details - Enterasys b5 Manual

show netstat
Defaults
If no parameters are specified, show netstat will be executed as shown in the example below.
Mode
Switch command, read‐only.
Example
The following example shows how to display statistics for all the current active network
connections.
B5(su)->show netstat
Prot Local Address
---- -----------------------------
TCP 127.0.0.1.2222
TCP 0.0.0.0.80
TCP 0.0.0.0.23
TCP 10.1.56.17.23
UDP 0.0.0.0.17185
UDP 127.0.0.1.49152
UDP 0.0.0.0.161
UDP 0.0.0.0.*
UDP 0.0.0.0.514
The following table describes the output of this command.
Table 14-4 show netstat Output Details
Output Field
Prot
Local Address
Foreign Address
State
14-18 Logging and Network Management
Foreign Address
-----------------------------
0.0.0.0.*
0.0.0.0.*
0.0.0.0.*
134.141.99.104.47718
0.0.0.0.*
127.0.0.1.17185
0.0.0.0.*
0.0.0.0.*
0.0.0.0.*
What it displays...
Type of protocol running on the connection.
IP address of the connection's local host.
IP address of the connection's foreign host.
Communications mode of the connection.
State
-----------
LISTEN
LISTEN
LISTEN
ESTABLISHED