Clear Snmp Community; Configuring Snmp Access Rights; Purpose - Enterasys b5 Manual

Usage
When you configure a community name, if you don't specify a context with the context parameter,
the default (NULL) context is applied. If you want to change a configured context back to the
default (NULL )context, enter a hyphen as the value of the context parameter, as shown in the
Examples below.
Examples
This example shows how to set an SNMP community name called "vip."
B5(su)->set snmp community vip
The example shows how to set the context for SNMP community "vip" to the default NULL
context.
B5(su)->set snmp community vip context -

clear snmp community

Use this command to delete an SNMP community name.
Syntax
clear snmp community name
Parameters
name
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to delete the community name "vip."
B5(su)->clear snmp community vip

Configuring SNMP Access Rights

Purpose

To review and configure SNMP access rights, assigning viewing privileges and security levels to
SNMP user groups.
Specifies the SNMP community name to clear.
clear snmp community
Enterasys B5 CLI Reference 8-15