Vehicle Belt Installation - Cosco Scenera Next Instruction Manual

2. Route Vehicle
Lap or Lap/Shoulder
Belt Through Rear-
Facing Belt Path
Review pages 27-29
and your vehicle
owner's manual to determine what kind of
vehicle belts you have and how to lock a
child restraint in place.
3. Reach Under Pad
and Pull Vehicle Belt
Across the Shell
1
2
Do not twist belt.
Belt MUST be in front
of buckle strap. You
MUST use the 1st or 2nd buckle slot. Do
not place belt over child's legs. Buckle
vehicle belt.
37
4358-6590B Scenera NEXT.indd 36-37 4358-6590B Scenera NEXT.indd 36-37
4. Tighten Belt
Place hand in child
restraint.
Firmly push child
restraint down
and back towards
the vehicle seat
Push and pull from side to side.
back while pulling
If it moves more than 1 in. (2.5 cm), try
free end of belt to
pulling the belt tighter, try reinstalling
tighten.
the child restraint, try another seating
location, or switch to using the LATCH
belt if available.
5. Check Belt
Tightness
Hold child restraint
at the belt path with
your weakest hand.
Check often to be sure padding is still in
place and the belt is tight.
6. Secure Child in
Child Restraint
Recheck level line.
Repeat steps 2-5
if level line is not
parallel with the
ground.
You may need to
place a large rolled
towel(s) or foam pool
noodle(s) under front
of child restraint
to help make level
line parallel with the
ground.
38
5/6/15 3:25 PM 5/6/15 3:25 PM