Vehicle Belt Installation - Cosco EASY ELITE Instructions Manual

Vehicle Belt Installation

WARNINGS:
belt along with the vehicle lap or lap/shoulder
belt. Secure the lower anchor hooks to storage
attachments as shown when installing with
vehicle belts.
Store the tether hook when used rear facing.
Attach the tether hook to storage attachment
as shown and gently tighten to remove slack.
Check the vehicle belt before each use. Use
only if the belt can be tightened properly and locked securely in
place.
Failure to follow these warnings can result in serious injury or
death.
1.
Pull Down Recline
Stand to Unlock and
Fold It Under Child
Restraint
NOTE:
hook to storage location before
folding recline stand. Then gently
tighten tether strap to remove slack.
2.
Pull Seat Pad Off the
Front of the Shell
3.
Place Child Restraint
Rear Facing in Back
Seat
33
Do not use the lower anchor
Loosely attach the tether
4.
Check if Your Vehicle Belts
Will Work With This Child
Restraint
This is very important because
all vehicle belts will work with child
restraints.
Review pages 23-25 and your vehicle
owner's manual to determine what
kind of vehicle belt you have and how
to lock a child restraint in place.
5.
Route Vehicle Lap or Lap/
Shoulder Belt Through Rear-
Facing Belt Path
6.
Pull Vehicle Belt Across to
Opposite Side
1
Buckle vehicle belt.
2
Do not twist belt.
Belt MUST
You MUST
slot. Do not place belt over child's legs.
not
be in front of buckle strap.
use the 1st or 2nd buckle
34
continued on next page