Cosco Scenera Next Instruction Manual page 25

6. Hook LATCH to
Vehicle Anchor
7. Tighten Belt
Place knee in child
restraint.
Firmly push down
while pulling free
end of belt to
tighten.
43
4358-6590B Scenera NEXT.indd 42-43 4358-6590B Scenera NEXT.indd 42-43
It may be easier to pull
pad away from shell
and tighten the belt
through the belt path
opening as shown.
If it moves more than 1 in. (2.5 cm), try
pulling the belt tighter, try reinstalling
8. Tighten Tether
the child restraint, try another seating
location, or switch to using the vehicle
With knee still in child
belts.
restraint, push firmly
on the back of the
seat and tighten tether
strap.
9. Check Belt
Tightness
Hold child restraint
at the belt path with
your weakest hand.
Push and pull from
side to side.
adjuster button to loosen belt. Unhook
LATCH from bar by squeezing spring
lever, pushing back into the seat bight
and twisting the hook. Then pull it
out of the vehicle seat.
when not in use. See page 25.
To Release
LATCH
Remove child
from child
restraint.
Remove tension
from LATCH belt
by pushing down
on side of child
restraint with
LATCH adjuster.
Then press
Store LATCH
44
5/6/15 3:25 PM 5/6/15 3:25 PM