Rear-Facing Vehicle Belt Install - Cosco SCENERA NEXT Manual

Rear-Facing Vehicle Belt Install

29
Before you begin installing the seat
into your vehicle, did you check:
Your child's weight and height?
See page 27.
Your child's fi t? See page 7.
Do you need to make adjustments to the
harness height or the buckle position?
1
Place Car Seat
Rear-Facing
in Back Seat
2
Check Level Line
The level line on the
shell must be
parallel with the
ground.
3
Check if Your
Vehicle Belts Will
Work With This
Car Seat
This is very
important because not all vehicle
belts will work with car seats.
Review pages 20-24 and your vehicle
owner's manual to fi nd out what kind
of vehicle belts you have and how to
lock a car seat in place.
4
Route Vehicle Belt
Thread the vehicle belt
into the Rear-Facing
Belt Path opening as
shown.
The belt goes:
• across the car
seat; AND
1
• under the car seat
2
pad; AND
• in front of the
buckle; AND
• out the other
Rear-Facing Belt
Path opening.
Do not twist belt.
30
Buckle Vehicle Belt
5
If your car's vehicle
belt has a switchable
retractor, use it to
lock the vehicle belt.
For information about
switchable retractors, see page 22 or
review your vehicle owner's manual.
6
Tighten Belt
Place your hand in
the car seat.
Firmly push the car
seat down and back
towards the vehicle seat back while
pulling the shoulder belt or the free
end of lap belt parallel with the
Rear-Facing Belt Path as shown.
continued on next page