Vehicle Belt Installation - Cosco VENUTRA Manual

8. Tighten Tether
Push fi rmly on the back of the seat
and pull the tether strap to remove all
slack and create tension on the strap.
9. Check Belt Tightness
Hold child restraint at the belt path with
your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
If it moves more than 1 in. (2.5 cm),
A. Reinstalling the child restraint. B. Putting your knee in the
seat and pulling the belt tighter. C. Changing to a different seat-
ing location. D. Switching to vehicle belt installation.
To Release Lower Anchor
Belt
Remove child from child restraint.
Remove tension from the lower
anchor belt by pushing down on
side of child restraint with the lower
anchor belt adjuster. Then press the
adjuster button to loosen belt.
Unhook from anchor by squeezing
spring lever on hook, pushing
hook back into the seat bight, and
twisting.Then pull it out of the
vehicle seat.
Store lower anchor belt when not
in use. See page 19.
29
you can try:

Vehicle Belt Installation

WARNINGS:
Do not use the lower anchor belt along
with the vehicle lap or lap/shoulder belt.
Store lower anchor hooks and belt as shown
when installing with vehicle belts.
Check vehicle belt before each use.Use only
if the belt can be tightened properly and
locked securely in place.
Failure to follow these warnings can result in serious injuryor
death.
1. Place Child Restraint
Forward Facing Flush
Against Vehicle Seat Back
2. Loosely Attach Tether
Hook
Check vehicle owner's manual for
specific location.
3. Check if Your Vehicle
Belts Will Work With This
Child Restraint
This is very important because
not all vehicle belts will work
with child restraints.
Review pages 21-23 and your vehicle owner's manual to
determine what kind of vehicle belt you have and how to lock a
child restraint in place.
30
continued on next page