Installing Child Restraints Using A Seat Belt (3-Point Type Seat Belt) - Toyota Vigo Owner's Manual

1-7. Safety information

Installing child restraints using a seat belt (3-point type seat belt)

Rear-facing  Baby seat/child seat

STEP 1
STEP 2
STEP 3
136
HILUX_OM_OM0K134E_(EE)
Place the child restraint system
on the rear seat facing the rear
of the vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Keep the lap portion of the belt
tight.
Install a locking clip near the
plate of the lap and shoulder belt
by inserting the lap and shoulder
webbing through the recesses of
the locking clip.