Replacing The Following Bulbs; When Installing The Rubber Cover Of The Headlight; Led Light Bulbs; Condensation Build-Up On The Inside Of The Lens - Toyota Vigo Owner's Manual

4-3. Do-it-yourself maintenance


Replacing the following bulbs

If any of the lights listed below has burnt out, have it replaced by
any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
 Side turn signal lights (mirror-mounted type) (if equipped)
 High mounted stoplight (if equipped)


When installing the rubber cover of the headlight

Ensure the rubber cover is securely attached.


LED light bulbs

The high mounted stoplight consists of a number of LEDs. If any of the LEDs
burn out, take your vehicle to any authorized Toyota dealer or repairer, or
another duly qualified and equipped professional to have the light replaced.


Condensation build-up on the inside of the lens

Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional for more information in the following situations.
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.
 Large drops of water have built up on the inside of the lens.
 Water has built up inside the headlight.
544
HILUX_OM_OM0K134E_(EE)
Fit the rubber cover outer circumfer-
ence in firmly.
Fit the rubber cover around the light
bulb in until the light bulb plug can be
seen.