Installing Child Restraints Using A Seat Belt; Rear-Facing; Baby Seat/Child Seat - Toyota YARIS Manual

Hide thumbs Also See for YARIS:
Table of Contents

Advertisement

1-7. Safety information

Installing child restraints using a seat belt

Rear-facing Baby seat/child seat
Place the child restraint system
on the rear seat facing the rear
1
of the vehicle.
Run the seat belt through the
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Install a locking clip near the tab
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.
105
YARIS_HB_WE_52A70E

Advertisement

Table of Contents
loading

Table of Contents