Locking And Unlocking The Gun; Plugging In The Sprayer; Pressure Relief Procedure - WAGNER Airless Sprayer Plus 0418 Operating Instructions Manual

Important information
GB
Paint straining
It is recommended that in order to avoid premature tip
and filter clogging you should strain your paint before
spraying. Follow manufacturer's recommendations.
Select tip and gun filter
Use the proper gun filter based on the tip size being used.
Tip Size Paint
XS For thin materials like acrylic
40° spray angle/ paints, primers, stains...
0,23 mm holeg
M For thick materials like
50° spray angle// internal emulsions, latex
0,38 mm hole paints, hollow-space
sealants..., ...

Locking and unlocking the gun

WARNING
Always lock the trigger off when attaching the spray tip
or when the spray gun is not in use.
Locking the gun
The gun is secured when the
trigger lock is at a 90° angle
(perpendicular) to the trigger
in either direction.
Unlocking the gun
To unlock the gun, turn the
trigger lock to be in line with
the trigger.
24

Plugging in the sprayer

1) Check that the ON/OFF switch is in the OFF
postion.
2) The connection must be made by
correctly grounded plug socket.
Filter
Red

Pressure relief procedure

yellow
Be sure to follow the pressure relief procedure when
shutting the unit off FOR ANY PURPOSE. This procedure
is used to relieve pressure from the spray hose.
1) Lock the spray gun off and
flip the ON/OFF switch to the
OFF position.
2) Turn the PRIME/SPRAY knob
to PRIME.
3) Unlock the spray gun and
then trigger it onto a scrap
piece of wood or cardboard.
4) Lock the spray gun.
Airless Sprayer Plus
WARNING