Before You Begin; Locking The Spray Gun; Pressure Relief Procedure; Emptying The Hopper - WAGNER Paint Crew Plus Owner's Manual

Before you begin -

Locking / Unlocking the Spray Gun
Always lock the trigger off when attaching the
spray tip or when the spray gun is not in use.
1. The gun is secured when the trigger lock is at a 90º
angle (perpendicular) to the trigger in either direction.
2. To unlock the gun, turn the trigger lock to be in line
with the trigger.

Pressure Relief Procedure

Be sure to follow the Pressure Relief Procedure when shutting the unit off for
any purpose. This procedure is used to relieve pressure from the spray hose.
1. Lock the spray gun off (see
directions above). Flip the
ON/OFF switch to the OFF position.
2. Turn the PRIME/SPRAY knob to
PRIME.
3. Unlock the spray gun. Trigger spray
gun onto a scrap piece of wood or
cardboard.
Removing / Emptying the Hopper
NOTE - Make sure your floors and furnishings are protected with drop cloths to avoid property damage.
NOTE - Always place the hopper on a hard, flat, stable surface when removed.
Pressure Relief Procedure
1. Perform
2. Pull the return tube (a) from the rear of the hopper lid.
3. Grab hopper by the side handles (b) and gently pull it out.
4. When finished emptying / cleaning, replace hopper and
hopper lid.
5. Replace the return tube by inserting it through the notch in
the hopper lid.
The hopper can be heavy when filled with spraying
material. Make sure to lift with your legs and not
your back in order to reduce the risk of injury.
Title
This section contains instructions that
will be repeated throughout this manual.
PRIME PRIME PRIME
(see above).
(a)
7
1
2
(b)
English