Parameter Data Record; Dependencies When Configuring With Gsd File - Siemens Simatic ET 200SP Manual

Parameter data record

A.1

Dependencies when configuring with GSD file

When configuring the module with a GSD file, remember that the settings of some
parameters are dependent on each other.
Configuring with a PROFINET GSD file
The table lists the properties and their dependencies on the measurement type and
measuring range for PROFINET.
Measurement type Measuring range
Deactivated
Voltage ±5 V
±10 V
1 V to 5 V
0 V to 10 V
x = Property is allowed, - = Property is not allowed, * = Property is not relevant
Configuring with a PROFIBUS GSD file
The table lists the properties and their dependencies on the measurement type and
measuring range for PROFIBUS.
Measurement type Measuring range
Deactivated
Voltage ±5 V
±10 V
1 V to 5 V
0 V to 10 V
x = Property is allowed, - = Property is not allowed, * = Property is not relevant
Analog input module AI 2xU ST (6ES7134-6FB00-0BA1)
Manual, 12/2015, A5E36104728-AA
No supply voltage Short-circuit to
L+ ground
* *
x -
x -
x x
x -
No supply voltage Short-circuit to
L+ ground
* *
x -
x -
x x
x -
Diagnostics
Overflow
*
x
x
x
x
Diagnostics
Overflow
*
x
x
x
x
A
Underflow
*
x
x
x
x
Underflow
*
x
x
x
x
27