Before initial use
Hand wash the slush container and all other removable parts before using.
You need
•
About 40–50 regular sized ice cubes. Use more if necessary.
•
About 4 measures (9) of coarse salt, which equals about 5 tbsp.
•
Up to 1 l of any cold sugar based soda or squash (not diet products or concentrate).
Note: For optimal performance, the soft drink must be cold before usage.
•
About 4 measures (9) of lukewarm water, which equals about 5 tbsp.
Note: If non-carbonated soda is used (e. g. squash, which has a higher freezing point) you need
8 measures (9) of lukewarm water and only 2 measures of salt.
Getting started/assembly
1. Place the slush container onto
the motor unit. Ensure that
the container sits securely onto
the drive stud with the tap centred
over the drip tray.
2. First insert the ice canister into
the slush paddle assembly and
then insert the ice paddles into
the ice canister.
3. Make sure the ice paddle assembly
locking latches snap securely onto
the slush paddle assembly. Check
that the 3 locking latches are
securely locked into place.
4. Place the entire assembly into
the slush container. Make sure
that all the assemblies sit securely.
5. Once everything is assembled,
attach the lid and make sure that
it locks securely into place onto
the slush container.
5