TP-Link TL-WR840N Quick Installation Manual

Quick Installation Guide
Multi-mode Router
Meet all your needs.
TL-WR840N
If your internet connection is through
an Ethernet cable directly from the wall,
instead of through a modem, connect
the Ethernet cable to the router's WAN
port, and skip Step 1,2,3.
Configure the router
1.
Connect your computer to the router (Wired or Wireless)
Wired
Turn off the Wi-Fi on your computer and connect it to the router via an
Ethernet cable.
Wireless
Connect your device to
the router's Wi-Fi using
the SSID (network name)
and Wireless Password
printed on the label at the
bottom of the router.
Power adapter
Connect the power
adapter to the router.
2.
Launch a web browser, enter http://tplinkwifi.net or
http://192.168.0.1 in the address bar. Use admin for both
username and password, and then click Login.
Note: If the login window does not appear, please refer to FAQ > Q1.
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
WPS/
POWER WAN 1 2 3 4 RESET
http://tplinkwifi.net
admin
admin
Login
Turn off the modem, and remove
the backup battery if any.
Turn on the modem and then wait
about 2 minutes for it to restart.
Router
Connect the modem to the router's
WAN port via an Ethernet cable.
3.
Click Next to start the Quick Setup. Select Standard
Wireless Router and follow the step-by-step instructions
to set up the internet connection.
Note: If you are not sure of the WAN Connection Type, please click
Auto-Detect.
Modem