Virtual Servers - TP-Link TL-WR840N User Manual

Chapter 4
Done!
Personal Website
LAN
Home
1. Set your PC to a static IP address, for example 192.168.0.100.
2. Visit http://tplinkwifi.net, and log in with the username and
password you set for the router.
3. Go to Forwarding
4. Click Add New. Select
Port list. The service port, internal port and protocol
will be automatically filled in. Enter the PC's IP address
192.168.0.100 in the
5. Leave the status as
Note:
• It is recommended to keep the default settings of
Protocol if you are not clear about which port and protocol to use.
• If the service you want to use is not in the
can enter the corresponding parameters manually. You should verify the
port number that the service needs.
• You can add multiple virtual server rules if you want to provide several
services in a router. Please note that the
overlapped.
Users on the Internet can enter
http:// 218.18.232.154) to visit your personal website.
Note:
• If you have changed the default
IP: Service Port to visit the website.
• Some specific service ports are forbidden by the ISP, if you fail to visit the
website, please use another service port.
Router
WAN: 218.18.232.154
> Virtual Servers.
HTTP from the
IP Address field.
Enabled and click Save.
Common Service Port
Service Port
http:// WAN IP
Service Port, you should use
Common Service
Internal Port and
list, you
should not be
(in this example:
http:// WAN
38