Parental Controls - TP-Link TL-WR840N User Manual

Chapter 4
For higher security, you can change the remote management web port to a custom
port by entering a number between 1 and 65534 but do not use the number of any
common service port.
• Remote Management IP Address
your router via a remote device. This function is disabled when the IP address is set
to the default value of 0.0.0.0. To enable this function, change 0.0.0.0 to a valid IP
address. If it is set to 255.255.255.255, then all the remote devices can access the
router from the Internet.
Note:
• To access the router, enter your router's WAN IP address in your browser's address bar, followed by a
colon and the custom port number. For example, if your router's WAN address is 202.96.12.8, and the
port number used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked
for the router's password. After successfully entering the username and password, you will be able to
access the router's web management page.
• Be sure to change the router's default password for security purposes.

4. 10. Parental Controls

Parental Controls allows you to block inappropriate and malicious websites, and control
access to specific websites at specific time for your children's devices.
For example, you want the children's PC with the MAC address 00-11-22-33-44-AA can
access www.tp-link.com on Saturday only while the parent PC with the MAC address
00-11-22-33-44-BB is without any restriction.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Access Control
3. Click Add New to create a new schedule entry with
as Sat and Time as all day-24 hours, and then click Save.
4. Go to Parental Control.
5. Select Enable and enter the MAC address 00-11-22-33-44-BB in the
PC field.
- This is the address you will use when accessing
> Schedule.
Schedule Description
MAC Address of Parental
as Schedule_1, Day
46