TP-Link TL-WR840N User Manual page 26

Chapter 4
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
• Connect Automatically
when it is down.
• Time-based Connecting
from the start time to the end time (both are in HH:MM format).
• Connect Manually
immediately. This mode also supports the
on Demand mode. The Internet connection can be disconnected automatically
after a specified inactivity period (Max Idle Time) and not be able to re-establish
when you attempt to access the Internet again.
Note:
• Only when you have configured the system time on the
time-based connecting function take effect.
• Sometimes the connection cannot be terminated although you have specified the
some applications are visiting the Internet continually in the background.
If you want to do some advanced configurations, please click Advanced.
• MTU Size - The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
• Service Name/AC Name
should not be configured unless you are sure it is necessary for your ISP. In most
cases, leaving these fields blank will work.
• ISP Specified IP Address
the router, please select
provided by your ISP in dotted-decimal notation.
- The connection can be re-established automatically
- The connection will only be established in the period
- You can click Connect/Disconnect
- The service name and AC (Access Concentrator) name
- If your ISP does not automatically assign IP addresses to
Use IP address specified by ISP
to connect/disconnect
Max Idle Time function as
System Tools > Time Settings
Max Idle Time
and enter the IP address
Connect
page, will the
because
21