TP-Link TL-WR840N User Manual page 130

• On Windows 7
1 ) If you see the message
wireless function is disabled or blocked somehow.
2 ) Clicking Troubleshoot
• On Windows XP
1 ) If you see the message
this is usually because windows configuration utility is disabled or you are
running another wireless configuration tool to connect the wireless.
2 ) Exit the wireless configuration tool (the TP-LINK Utility, for example).
3 ) Select and right click
Computer Management window.
4 ) Expand Services and Applications
Zero Configuration
5 ) Right click Wireless Zero
6 ) Change Startup type
is Started. And then click OK.
If you can find other wireless network except your own, please follow the steps below:
• Check the WLAN LED indicator on your wireless router/modem.
• Make sure your computer/device is still in the range of your router/modem. Move
closer if it is currently too far away.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to
the wireless network for the first time. This PIN number is different from the
Wireless Password/Network Security Key. Usually you can only find it on the
label of your router.
No connections are
and windows might be able to fix the problem by itself.
Windows cannot configure this wireless
My Computer on Desktop, and select
> Services, and find and locate
in the Services list on the right side.
Configuration, and then select Properties.
to Automatic, click
available, it is usually because the
Start and make sure the Service status
connection,
Manage to open
Wireless
125