Bigpond Cable - TP-Link TL-WR840N User Manual

Chapter 4
• Detect Online Interval
interval. The default value is 0. You can input the value between 0 and 120. The value
0 means no detect.
• Primary DNS/Secondary DNS
addresses to the router, please select
address in dotted-decimal notation of your ISP's primary DNS server. If a secondary
DNS server address is available, enter it as well.

BigPond Cable

If your ISP provides BigPond cable connection, please select
• User Name/Password
These fields are case-sensitive.
• Auth Server - Enter the authenticating server IP address or host name.
• Auth Domain - Type in the domain suffix server name based on your location.
• MTU Size - The default MTU size is 1480 bytes. It is not recommended that you change
the default MTU size unless required by your ISP.
• Connection Mode
• Connect on Demand
automatically after a specified inactivity period (Max Idle Time) and be re-
established when you attempt to access the Internet again. If you want to keep
your Internet connection active all the time, please enter 0 in the
field. Otherwise, enter the number of minutes you want to have elapsed before
your Internet access disconnects.
- The router will detect Access Concentrator online at every
- If your ISP does not automatically assign DNS
Use the following DNS servers
- Enter the user name and password provided by your ISP.
- In this mode, the Internet connection can be terminated
and enter the IP
BigPond Cable.
Max Idle Time
22