TP-Link TL-WR840N User Manual page 16

Chapter 2
Internet Ethernet1 Ethernet2 Ethernet3
Ethernet1 Ethernet2
Wired Host Router
1. Connect the power adapter to the router and turn on the router.
2. Connect the router to your wired host router's Ethernet port via an Ethernet cable as shown
above.
3. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID
(network name) and password printed on the bottom label of the router.
4. Enter http://tplinkwifi.net
then click Login.
Note:
If the above screen does not pop-up, it means that your IE Web-browser has been set to a proxy. Go to
Internet Options > Connections > LAN
OK to finish it.
5. After successfully login, select
the configuration.
Note:
If you want to change the default SSID (network name) and the password, please follow Quick Setup to complete the
configuration.
6. Enjoy! Connect to the wireless network by using the SSID (wireless name) and password of
the router.
Ethernet4
Ethernet3 Ethernet4
in the address bar of a web browser. Use
Settings, in the screen that appears, cancel the Using Proxy checkbox, and click
Access Point
WPS/
POWER WAN 1 2 3 4 RESET
Access Point
mode and follow the
Client
admin for password, and
Tools menu >
Quick Setup to complete
11