Install Majestic Decorative Front/Angledhood - Majestic MERC32VN Installation Manual

F. Install Majestic Decorative Front/Angled-
Hood
WARNING! Risk of Fire! Install ONLY doors or fronts
approved by Hearth & Home Technologies. Unapproved
doors or fronts could cause fi replace to overheat.
This fireplace has been supplied with an integral
barrier to prevent direct contact with the fi xed glass
panel. DO NOT operate the fi replace with the barrier
removed.
Contact your dealer or Hearth & Home Technologies if
the barrier is not present or help is needed to properly
install one.
1. Remove decorative front by lifting up and away from
appliance.
2. Remove four shoulder bolts from manual bag assembly
and install as shown in fi gure 11.5.
3. Hang decorative front onto shoulder bolts.
4. Install hood on appliance by inserting into the two hood
clips. See Figure 11.5.
Figure 11.5 Install Majestic Decorative Front and Angled Hood
Majestic • MERC32IN, MERC32IL, MERC32VN, MERC32VL Installation Manual • 2401-980 Rev. C • 11/16
55