Install The Log Assembly - Majestic MERC32VN Installation Manual

D. Install the Log Assembly
Log Set Assembly: LOGS-MERC32
Models: MERC32IN, MERC32IL, MERC32VN, MERC32VL
CAUTION: Logs are fragile, handle with care.
See Figure 1 and Figure 2 for log identifi cation.
Note: Log 5 and Log 6 are the same log.
1 1
2 2
3 3
Figure 1. Logs 1, 2 and 3
LOG PLACEMENT POINTS LOG PLACEMENT POINTS
BEND TAB UP BEND TAB UP
Figure 3.
Figure 3 shows the points used for correct log placement. Bend the tab on the basepan upward to a 90 degree angle as
shown. The two shoulder screws will be used in placement of Log 1 and Log 3.
Log #1 SRV2401-701: Locate the hole on the bottom right side of Log 1 and the shoulder screw marked "1" in Figure 3.
Place the hole onto the shoulder screw as shown in Figure 4. Push the left side of Log 1 back until it contacts the back wall
of the fi rebox.
52 Majestic • MERC32IN, MERC32IL, MERC32VN, MERC32VL Installation Manual • 2401-980 Rev. C • 11/16
1 1
2 2
LOG PLACEMENT INSTRUCTIONS
6 6
5 5
4 4
Figure 2. Logs 4, 5 and 6
LOG POINT CONTACTS WALL LOG POINT CONTACTS WALL
1 1
Figure 4.