Hyundai HYBCF31 User Manual page 15

Stopping the engine
1. Reduce the engine speed and let it run with no load for a few minutes.
The blade may cause an accident if it continues to turn after the engine has stopped or after the engine switch
has been released. When the unit has stopped, check carefully that the blade has stopped turning before
putting the unit down.
MAINTENANCE
Good maintenance is essential for safe, economical and trouble-free operation. It will also help reduce air
pollution. The purpose of the maintenance and adjustment schedule is to keep the machine in the best
operating condition.
sure the area is well ventilated. The exhaust contains poisonous carbon monoxide gas Please always select
recommended accessories. The accessories which have not equivalent quality may damage the machine.
Please never use non approved components and remove the safety devices after or during
Maintenance
Clean the outside of the machine.
Make sure the throttle trigger lock and the throttle
Function correctly from a safety point of view.
Check that the engine switch works correctly.
Check that the blades do not move when the engine
is idling or when the choke is in the start throttle position.
Check that the blades are undamaged and show no
signs of cracking or other damage. Replace the blades
if necessary.
Check that the blade guard is not damaged or
distorted. Replace the blade guard if it is bent or damaged.
Check that there are no fuel leaks from the engine,
tank or fuel lines.
C heck that nuts and screws are tight.
C heck the starter and starter cord.
Hyundai HYBCF31 Brush Cutter & Grass Trimmer
e engine switch to the stop position.
maintenance
Page 15
Daily Weekly
maintenance
X
X
X
X
X
X
X
X
X
Operator's Manual
maintenance.
Monthly
maintenance
Rev 3