3Com CoreBuilder 9000 Quick Installation Manual page 21

Where To Go from
Here
Locating 3Com
User Documentation
After you have installed the chassis, use the following information to
proceed:
Task
Install power supplies
Install an EME
Install an EMC (optional)
Install the switch fabric module
Install interface module
Configure the Switch
The CoreBuilder 9000 Enterprise Switch Getting Started Guide is
available in Adobe Acrobat Portable Document Format (PDF) format on
the 3Com Documentation CD-ROM that comes with the product.
The CD-ROM also contains:
Additional CoreBuilder 9000 documents in Adobe Acrobat format
Adobe Acrobat Reader and Reader installation instructions
If you have difficulty installing the Acrobat Reader, use an Internet
browser to download the reader from the Adobe home page at
http://www.Adobe.com
You can view additional 3Com technical documentation on the 3Com
home page at http://www.3com.com. Click Support and look under
Documents and Software.
7-Slot Chassis Quick Installation Guide
See this CoreBuilder
7-Slot Chassis Power Supply Installation
Guide
Enterprise Management Engine Quick
Start Guide
Enterprise Management Controller Quick
Start Guide
Gigabit Ethernet Switch Fabric Module
Quick Start Guide
Module Quick Start Guide (specific to
each module — Fast Ethernet, Gigabit
Ethernet)
Enterprise Management Engine User
Guide
21
™
9000 document