On-Screen Calculator; Time And Date Display; Stored Transactions; Training Mode - Moneris smartselect Operating Manual

Features & Procedures
16
Moneris. The Agreement contains important
provisions regarding your responsibility for POS
Admin Card security and your liability for financial
transactions made with a POS Admin Card.

3.1.4: On-screen Calculator

The SmartSELECT has an on-screen calculator that can perform basic math func-
tions and has a memory function as well as the ability to paste values into the
amount field in a transaction (See Chapter 11: On-Screen Calculator for detailed
information).

3.1.5: Time and Date Display

At the bottom of the Sleeping screen, the SmartSELECT displays the current time
and date. If the date and time are visible, press the bottom of the touch screen (the
entire area is a button) to make them disappear. If they are not visible, press the
bottom of the touch screen to make them appear.

3.1.6: Stored Transactions

The SmartSELECT can store up to 1000 approved Credit and Debit transactions
in its memory and, if your terminal is configured to process Gift Card transac-
tions, up to 500 approved Gift Card transactions. These transactions are search-
able, allowing you to print reports and reprint receipts in the event of a disputed
transaction.
The oldest transaction is dropped once the terminal memory reaches capacity. If
your terminal is replaced, the memory cannot be transferred to the new terminal,
and is therefore lost. Moneris recommends printing a list of all transactions on the
old terminal before disconnecting it then installing the new terminal.

3.1.7: Training Mode

Training mode on the SmartSELECT enables the transaction screens, but does not
connect to the host when you complete a transaction. This allows you and your
staff to practice processing financial transactions without communicating those
transactions to the Moneris Host and without affecting your bank account or your
customer's bank account. (See Chapter 5: Training Mode for instructions.)

3.1.8: Bilingual Displays and Receipts

The SmartSELECT terminal displays text in either English or French.
The initial message on the PINPad (if a PINPad is attached to the SmartSELECT)
is always bilingual. The language of the PINPad messages and prompts after the
customer's card has been swiped will be based on that card's language code.
Customer and merchant receipts can be printed by the SmartSELECT in English,
in French or bilingually. If the printer is configured to print separate copies for the
customer and merchant (i.e., two or three copies), the customer receipt language is
based on the language code on the customer's card; the merchant receipt language
SmartSELECT Merchant Operating Manual v 2.0