Table of Contents
Advertisement
4.2
Daily Cleaning
D
Slide the knob on the restriction roller right to unlock and remove the restriction
roller.
-
Push the restriction roller forward to eject the shaft on the front side, insert the front side shaft of
the restriction roller in the bigger hole next to the hole previously inserted, and remove the shaft on
the back side of the restriction roller.
-
When pulling out the restriction roller, slide the Protective cover to the back along the restriction
guide of the restriction roller.
E
Use isopropyl alcohol to clean adhesive sticking to both ends of the tension roller 1.
Keep in mind that the shaft with a groove is for the front side.
NOTICE
NOTICE
If it is hard to remove adhesive, use the supplied hexagonal wrench to detach the media guides on both ends
of the roller before cleaning.
To attach the media guides, turn the side with the green ICP film adhered inward (in the media side).
After attaching the media guides, adjust their positions. For details, refer to page 4-16.
4-5
2
3
1
Advertisement
Table of Contents
