Table of Contents
Advertisement
6.2
Name of each Component
No.
Name
8
Lug
9
Media guide
10
Squeezing bar
11
Rubber roller
12
Pull roller
13
Loop detection sensor
14
Side plate
15
Lever
16
Side plates moving handle
Status Indicator Light MK-744
Status indicator light MK-744 is optional.
No.
Name
1
Status LED
For details on the machine status indicated by the Status LED, refer to the following table.
Status indicator light
(color)
Red
Orange
Green
Blue
Off
6-12
Description
Fixes the media core to the winding shaft.
Avoids the media from meandering.
Adjusts the media tension when winding.
Holds and conveys the media.
Conveys the media.
Detects an error of the amount of the media loop.
Avoids the media from meandering when winding. The side
plates moving handle allows you to adjust the width between
the plates.
Attaches or detaches the rubber roller to or from the media.
Adjusts the width of the side plates.
1
Description
Displays the machine condition in four colors of light.
Machine state
The machine stops by the error occurrence, such as paper jam, replenishing toner
supply, or replacing the media. The status indicator lights in red before the ma-
chine stops when the remaining toner is 1 % or less.
The message for attention to toner is displayed. Also it lights in orange when the
waste toner box is nearly full.
Printing is in process.
Ready for printing.
Main power switch or sub power switch is off. Or, printing is not available if the
machine is warming up or any door is opened.
Advertisement
Table of Contents
