Internal Machine Items - Konica Minolta C71cf Quick Manual

)Internal Machine Items

6
No. Name
1 Loop detection sensor
2 Fixing handle
3 Feeding shaft
4 Winding diameter detection sensor
5 Paper feed loop fan
6 Lever
7 Guide roller
8 Roller
9 Rubber roller
10 Pull roller
11 Guide roller
12 Guide plate
13 Cutter groove
14 Media pressing bar 1
15 Media pressing bar 2
16 Lug
17 Lug protruding/retracting handle
9
8
7
1
5
4 3
17
Description
Detects an error of the amount of the media loop.
Fixes the media guide to the feeding shaft.
Set a media. Controls the configured media tension.
Measures the diameter of the media, and alarm beeps when the
media reaches minimum diameter. You can specify the machine
behavior when the alarm beeps.
Stabilizes the form of the loop.
Attaches or detaches the rubber roller to or from the media.
Conveys the media.
Conveys the media. There are three locations: front side, center,
and back side.
Holds and conveys the media.
Conveys the media.
Conveys the media.
Stabilizes the media conveyance.
Cuts the media along the groove.
Holds the media when replacing.
Holds the media when replacing.
Fixes the media core to the feeding shaft.
Turns to move up and down the lug to fix or remove the media
core.
bizhub PRESS C71cf
10 11 12
15 14
16
13
2
6
6-9