Operation After Printing; Step 1: Replace The Media Core; Step 2: Idle The Machine - Konica Minolta C71cf Quick Manual

2.3

Operation After Printing

Step 1: Replace the Media Core

Remove the media after printing and install a new media core.
Reference
For details, refer to page 3-20.

Step 2: Idle the machine

After printing, perform the following operations to idle the machine.
-
Turn the Winding Motor OFF
- To prevent the winding motor from deteriorating, turn the motor OFF.
- Detach the rubber rollers of Roll Winder RW-101/Roll Winder RW-201.
- To prevent the rubber rollers and the media from attaching to each other, detach the rubber rollers on Roll
Winder RW-101/Roll Winder RW-201.
A
Press the REWIND MOTOR OFF on the control panel of Roll Winder RW-201.
The motor of Roll Winder RW-201 stops.
B
Open the front door of Roll Winder RW-201 and move the lever to detach the rubber
roller.
C
Close the front door of Roll Winder RW-201.
REWIND MOTOR REWIND MOTOR
EMG.RESET
ON OFF
STOP READY JOG
bizhub PRESS C71cf
2-19
2