Inspection - Agilent Technologies 66319B User Manual

3 - Installation

Inspection

Damage
When you receive your dc source, inspect it for any obvious damage that may have occurred during
shipment. If there is damage, notify the shipping carrier and the nearest Agilent Sales and Support Office
immediately. The list of Agilent Sales and Support Offices is at the back of this guide. Warranty
information is printed in the front of this guide.
Packaging Material
Until you have checked out the dc source, save the shipping carton and packing materials in case the unit
has to be returned. If you return the dc source for service, attach a tag identifying the owner's name and
address, the model number, and a brief description of the problem.
Items Supplied
The following user-replaceable items are included with your dc source. Some of these items are installed
in the unit.
Item
Power Cord contact the nearest Agilent
Sales and Support Office
Digital I/O
connector
Output
connector
DVM
connector
Sense jumpers
Line Fuse
Feet
User's Guide
Cleaning
Use a dry cloth or one slightly dampened with water to clean the external case parts. Do not attempt to
clean internally.
WARNING:
To prevent electric shock, unplug the unit before cleaning.
24
Table 3-1. Items Supplied
Part Number
1252-1488
0360-2604
1252-8670
8120-8821
2110-0638
2110-0773
5041-8801
5964-8125
Description
A power cord appropriate for your location.
4-terminal digital plug for connecting digital I/O leads.
The connector installs in the back of the unit.
5-terminal output plug for connecting load and sense
leads. This connector installs in the back of the unit.
3-terminal plug for DVM connections (66319B/D)
Jumpers that insert into output connector for local
sensing. Connect +s to +, and −s to −.
3.15 AT (time delay) for 100/120 Vac operation
1.6 AT (time delay) for 220/230 Vac operation
feet for bench mounting
This manual. Contains installation, checkout, front
panel, and programming information.