Front view Rear view Reset button LAN port 10/100 (RJ45 Ethernet socket) A brief press of the button will reset the device. Description Holding the reset button pressed in for approximately Tx + 10 seconds (until red LED starts flashing) will reset the device and restore the factory default settings when the Tx - button is released.
Page 3
Click on the drop-down menu next to “Protocol” STEP 4 field and select “Static”. i) The Exstreamer Store & Play will now acquire an IP You will need to set the address and announce it over the audio outputs. DHCP IP Address, Netmask,...
For information about our products, manuals, technical documentation, latest firmware, support and access to the user forum please visit www.barix.com. Barix AG, Seefeldstrasse 303, CH-8008 Zürich P +41 43 433 22 11 info@barix.com, www.barix.com...