Using The 3Dyc And I-P Mode; Sound Adjustments; Focus - Pioneer PDP-506XDE Operating Instructions Manual

Basic Adjustment Settings
08
ACL
Performs such compensation that results in the optimum contrast
characteristics for images.
Selections Off
On
Gamma
Adjusts the gamma characteristics (image gradation characteristics).
Selections 1
2
3
7
Press HOME MENU to exit the menu.

Using the 3DYC and I-P Mode

1
Press HOME MENU.
2
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "Others" ( /
5
Select an item to be adjusted ( /
• You can select "3DYC" or "I-P Mode".
6
Select the desired parameter ( /
3DYC
Optimises characteristics for separating brightness signals and colour
signals. This works for both video and still images.
Selections Off
High
Mid
Low
I-P Mode
Perform optimum conversion from interlace signals to progressive
signals. This works for both video and still images.
Selections 1
2
3
7
Press HOME MENU to exit the menu.
NOTE
• For the 3DYC, the individual parameters are selectable only
when:
You have selected INPUT 1, 2, or 3 as the input source and
"Video" as the input signal type (page 55); or
You have selected INPUT 5 as the input source without a
S-Video cable in connection; or
You have selected the analog tuner.
• For the I-P Mode, the individual parameters are not
selectable for the following input signals:
480p, 720p@60Hz, 576p, 720p@50Hz, 1080p@24Hz
36
En
Deactivates the ACL.
Activates the ACL.
Selects gamma characteristics 1.
Selects gamma characteristics 2.
Selects gamma characteristics 3.
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
Deactivates the 3DYC.
Enhanced 3DYC
Standard 3DYC
Moderate 3DYC
Optimum for video images
Standard setting
Optimum for still images

Sound adjustments

You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV
Selection option. See page 33.
1
Press HOME MENU.
2
then ENTER).
Select "Sound" ( /
3
Select an item to be adjusted ( / ).
4
Select the desired level ( / ).
Sound STANDARD
Treble
Bass
Balance
Reset

FOCUS

Front Surround
Headphone Output
Sub Volume
Item
button
Treble
For weaker treble
Bass For weaker bass
Balance Decreases audio from the
right speaker.
5
Press HOME MENU to exit the menu.
NOTE
• To restore the factory defaults for all items, press
select "Reset" in step 3, and then press ENTER. A
confirmation screen appears. Press
then press ENTER.
• You cannot adjust the sound quality for listening with
phones.
• If you perform sound adjustments with phones connected,
the new settings will become effective for sound from the
speakers after the phones are disconnected.
FOCUS
This shifts the sound coming direction (sound images) upward
and produces clear sound contours.
1
Press HOME MENU.
2
then ENTER).
Select "Sound" ( /
3
Select "FOCUS" ( / ).
4
Select the desired parameter ( / ).
Reset
FOCUS
Front Surround
2
0
0
Off
Off
Main
15
button
For stronger treble
For stronger bass
Decreases audio from the
left speaker.
/ to
/ to select "Yes", and
Off
Off