Using The 3Dyc And I-P Mode; Sound Adjustments - Pioneer PureVision PDP-427XG Operating Instructions Manual

08 Setting up

Using the 3DYC and I-P Mode

1 Press HOME MENU.
2 Select "Picture" (
3 Select "Pro Adjust" (
4 Select "Others" (
5 Select an item to be adjusted (
• You can select "3DYC" or "I-P Mode".
6 Select the desired parameter (
3DYC
Optimizes characteristics for separating brightness signals and color signals.
This works for both video and still images.
Selections Off
High
Mid
Low
I-P Mode
Perform optimum conversion from interlace signals to progressive signals. This
works for both video and still images.
Selections 1
2
3
7 Press HOME MENU to exit the menu.
Note
• The 3DYC setting is ineffective when SECAM, PAL-M, PAL-N or
4.43 NTSC signals are input.
• For the I-P Mode, the individual parameters are not selectable
for the following input signals: 480p, 720p@60 Hz, 576p,
720p@50 Hz, 1080p@24 Hz.
• For the 3DYC, the individual parameters are selectable only
when you have selected the analog tuner, or you have selected
input 1, 2, 3 or 5 as the input source and there is a video signal
present.
32
En
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
Deactivates 3DYC.
Enhanced 3DYC
Standard 3DYC
Moderate 3DYC
Optimum for video images
Standard setting
Optimum for still images

Sound adjustments

You can adjust the sound quality to your preference with the
following settings.
Adjust the sound to your preference for the chosen AV Selection
option (see AV Selection on page 28).
1 Press HOME MENU.
2 Select "Sound" ( then ENTER).
3 Select an item to be adjusted (
4 Select the desired level (
Sound STANDARD
Treble
Bass
Balance
Reset
FOCUS
Front Surround
Headphone Output
Sub Volume
Item button
Treble For weaker treble
Bass For weaker bass
Balance Shifts the audio balance to
the left
5 Press HOME MENU to exit the menu.
Note
• You cannot adjust the sound quality for listening with
headphones.
• If you perform sound adjustments with headphones
connected, the new settings will become effective as soon as
you disconnect the headphones.
• To restore the factory defaults for all items, press
select "Reset" in step 3, and then press ENTER. A confirmation
screen appears. Press
ENTER.
).
).
2
0
0
Off
Off
Main
15
button
For stronger treble
For stronger bass
Shifts the audio balance to
the right
to
to select "Yes", and then press