Advanced Picture Adjustments; Using Purecinema; Using Colour Temp; Using Cti - Pioneer PDP-506XDE Operating Instructions Manual

Basic Adjustment Settings
08
For PC source
Item
button
Contrast For less contrast
Brightness
For less brightness
Red
For weaker red
Green For weaker green
Blue For weaker blue
NOTE
• To perform advanced picture adjustments, select "Pro
Adjust" in step 3 and then press ENTER. For the subsequent
procedures, see "Advanced picture adjustments".
• To restore the factory defaults for all items, press
select "Reset" in step 3, and then press ENTER. A
confirmation screen appears. Press /
then press ENTER.

Advanced picture adjustments

The Plasma Display System provides various advanced
functions for optimising the picture quality. For details on
these functions, see the tables.

Using PureCinema

1
Press HOME MENU.
2
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "PureCinema" ( /
5
Select the desired parameter ( /
• For the selectable parameters, see the table.
PureCinema
Automatically detects a film-based source (originally encoded at 24
frames/second), analyses it, then recreates each still film frame for high-
definition picture quality.
Selections Off
Standard
ADV
NOTE
• "Standard" is not selectable when 480p or 720p@60Hz
signals are input.
• "ADV" is not selectable when PAL, SECAM, 576i, or
1080i@50Hz signals are input.
• Neither "Standard" nor "ADV" is selectable when 576p,
720p@50Hz, or 1080p@24Hz signals are input.
34
En
button
For more contrast
For more brightness
For stronger red
For stronger green
For stronger blue
/
to select "Yes", and
then ENTER).
then ENTER).
then ENTER).
then ENTER).
Deactivates the PureCinema.
Produces smooth and vivid moving
images (film specific) by automatically
detecting recorded image information
when displaying DVD or high-definition
images (e.g., movies) having 24 frames
per second.
Produces smooth and quality moving
images (as shown on theatre screens) by
converting to 72 Hz when displaying DVD
images (e.g., movies) having 24 frames
per second.

Using Colour Temp

1
Press HOME MENU.
2
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "Colour Detail" ( /
5
Select "Colour Temp" ( /
6
Select the desired parameter ( /
• If you have selected a desired parameter in this step,
skip steps 7 and 8.
• You may rather want to perform fine adjustment. To do
this, select "Manual" first and then press and hold
ENTER for more than three seconds. The manual
adjustment screen appears. Then go to step 7.
to
Colour Temp
Adjusts the colour temperature, resulting in a better white balance.
Selections High
Mid-High
Mid
Mid-Low
Low
Manual
7
Select an item to be adjusted ( /
8
Select the desired level ( / ).
Item
R High
Fine adjustment
for bright
G High
portions
B High
R Low Fine adjustment
for dark
G Low
portions
B Low
• To perform adjustment for another item, press RETURN,
and then repeat steps 7 and 8.
• You may press
be adjusted.
9
Press HOME MENU to exit the menu.

Using CTI

1
Press HOME MENU.
2
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "Colour Detail" ( /
5
Select "CTI" ( /
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
White with bluish tone
Intermediate tone between High and Mid
Natural tone
Intermediate tone between Mid and Low
White with reddish tone
Colour temperature adjusted to your
preference
then ENTER).
button button
For weaker red For stronger red
For weaker green For stronger green
For weaker blue For stronger blue
For weaker red For stronger red
For weaker green For stronger green
For weaker blue For stronger blue
/ to immediately change an item to
then ENTER).
then ENTER).
then ENTER).
then ENTER).