Delta Childrens Products Crib N Changer Instructions Manual

Delta Childrens Products Crib N Changer Instructions Manual

Crib converts to a toddler bed, daybed and full-size bed
Hide thumbs Also See for Crib N Changer:

Advertisement

Crib N Changer
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
Consumer Care:
www.DeltaChildren.com
Delta Children's Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Conforms to
ASTM F1169-10a Full
Size Crib, F1821 & F2388
Safety Standards
To register your product for important safety alerts and updates to your product please
visit www.DeltaChildren.com and click on Product Registration.
JUNE 7, 2012, 23438, R5
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
Style #:
___________
Lot:
___________
Date:
___________
When contacting Delta Consumer
Care you will need to reference the
above numbers. They can also be
found on the label on the Crib End
bottom rail.
B
REV
FACTORY
©2012 DELTA ENTERPRISE CORP.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Crib N Changer and is the answer not in the manual?

Questions and answers

Hae Soo Kim
June 23, 2025

Do you have Crib N Changer manual for: Model: 80100-207 Version B PO: 255511 Lot: NC12309 SKN: 740228 Fabrication Date: 2012 11

Summary of Contents for Delta Childrens Products Crib N Changer

  • Page 1 KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete. Crib N Changer THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. Consumer Care: Style #: ___________ www.DeltaChildren.com...
  • Page 2 CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING 6 IN. WARNING: *Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
  • Page 3 TODDLER BED WARNING INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions. The maximum user weight is 50lbs (22.7kg) WARNING STRANGULATION HAZARD NEVER place bed near windows where cords from blinds or drapes may strangle a child.
  • Page 4 NOTES ON ASSEMBLY: -During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape specified in the instructions. -To assemble this unit you may be required to place the unit on it’s side and face.
  • Page 5 PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. C. Changer Top Rail x 1 Part # 16843 A. Changer B. Changer Left Side x 1 Right Side x 1 D. Changer Middle Rail x 1 Part # 21622 Part # 21623 Part # 21624 G.
  • Page 6: Table Of Contents

    PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. P. Stabilizer Bar x 1 Part # 16853 M. Crib End x 1 N. Crib Back Side x 1 Part # 16851 Part # 16852 R. Crib Front Side x 1 Part # 16854 S.
  • Page 7 PARTS: HARDWARE KIT PART #16863 FOR COLOR 205. SEE FRONT COVER. BB. M6 x 40 mm Bolt x 18 No drills necessary. Do not use power screwdriver. CC. M6 x 35 mm Bolt x 4 M4 Allen Wrench DD. M6 x 15 mm Bolt x 4 Supplied EE.
  • Page 8 Section 1: Changing Table Assembly Step 1 Parts and tools required to complete step. C. Changer Top Rail x 1 E. Changer G. Changer Back Fixed Shelf x 1 Rail x 1 BB. M6 x 40 mm Bolt x 4 M4 Allen Wrench Supplied A.
  • Page 9: Part

    Section 1: Changing Table Assembly Step 2 Parts and tools required to complete step. D. Changer Midddle Rail x 1 From Step 1 Lay Changer Left Side (Part A) on a soft non abrasive surface such as the foam packing wrap. Insert (1) Changer Middle Rail (Part D) as shown.
  • Page 10: H. Changer Surface With Strap X

    Section 1: Changing Table Assembly Step 3 Parts and tools required to complete step. K. Small Changer Panel x 1 H. Changer Surface with Strap x 1 L. Large Changer From Step 2 Panel x 1 Slide Changer Surface with Strap (Part H) in between Changer Middle Rail (Part D) and Changer Back Rail (Part G) Grooves as shown.
  • Page 11: Part

    Section 1: Changing Table Assembly Step 4 Parts and tools required to complete step. BB. M6 x 40 mm Bolt x 4 CC. M6 x 35 mm Bolt x 2 B. Changer M4 Allen Wrench From Step 3 Right Side x 1 Supplied Carefully align all panels, tabs and pins with the holes and slots in the Changer Right Side (Part B).
  • Page 12: Part

    Section 2: Crib Assembly Step 1 Parts and tools required to complete step. BB. M6 x 40 mm Bolt x 2 P. Stabilizer Bar x 1 EE. M4 x 30 mm Metal Pin x 2 From Section 1 Step 4 M4 Allen Wrench M.
  • Page 13: Part

    Section 2: Crib Assembly Step 2 Parts and tools required to complete step. From Step 1 BB. M6 x 40 mm Bolt x 4 M4 Allen Wrench Supplied N. Crib Back Side x 1 Attach the Crib Back Side (Part N) between the posts with (4) M6x40mm Bolts (Part BB). Tighten these bolts with the M4 Allen Wrench, Do Not tighten the Bolts installed in the pervious step.
  • Page 14: Part

    Section 2: Crib Assembly Step 3 Parts and tools required to complete step. DD. M6 x 15 mm Bolt x 4 GG. Mattress Support x 1 M4 Allen Wrench Supplied From Step 2 Attach the Mattress Support (Part GG) in all corners using (1) M6x15 mm Bolt (Part DD) in each corner. Tighten with the M4 Allen Wrench.
  • Page 15: Part

    Section 2: Crib Assembly Step 4 Parts and tools required to complete step. BB. M6 x 40 mm Bolt x 4 EE. M4 x 30 mm Metal Pin x 4 R. Crib Front Side x 1 M4 Allen Wrench Supplied From Step 3 Attach the Crib Front Side (Part R) to the Assembly from step 3 using (4) M4x30mm Metal Pin (Part EE) and (4) M6x40mm Bolts (Part BB).
  • Page 16: Part

    Section 2: Crib Assembly Step 5 Parts and tools required to complete step. AA. Shelf Clips x 8 Phillips Screwdriver Supplied S. Removable Shelf x 2 From Step 4 Insert the Shelf Clips (Part AA) in the holes in the posts of the Changing Table. Place the Removable Shelves (Part K) inside the Shelf Clips.
  • Page 17: Part

    Section 3: Hamper Assembly Step 1 Parts and tools required to complete step. FF. 19 mm Screw x 6 Phillips Screwdriver T. Hamper Front x 1 U. Hamper Side x 2 Supplied Attach (2) Hamper Sides (Part U) to the Hamper Front (Part T) with (3) 19mm Screws (Part FF) for each. Tighten with the Phillips Screwdriver.
  • Page 18: Part

    Section 3: Hamper Assembly Step 2 Parts and tools required to complete step. FF. 19 mm Screw x 6 Phillips Screwdriver V. Hamper Back x 1 Supplied From Step 1 Attach the Hamper Back (Part V) to the Hamper Sides (Part U) with (3) 19mm Screws (Part FF) for each. Tighten with the Phillips Screwdriver.
  • Page 19: W. Hamper Bottom X

    Section 3: Hamper Assembly Step 3 Parts and tools required to complete step. Z. Caster x 4 W. Hamper Bottom x 1 FF. 19 mm Screw x 8 Caster Wrench Phillips Screwdriver From Step 2 Supplied Supplied 1. Attach the Hamper Bottom (Part W) to the Assembly From Step 2 with (8) 19mm Screws (Part FF). Tighten with the Phillips Screwdriver.
  • Page 20: Part

    Section 3: Hamper Assembly Step 4 Parts and tools required to complete step. X. Hamper Handle x 1 Y. Handle Bolt x 1 Phillips Screwdriver From Step 3 Supplied Attach the Hamper Handle (Part X) to the Assembly from Step 3 using (1) Handle Bolt (Part Y). Tighten with the Phillips Screwdriver.
  • Page 21: Part

    Section 4: Step 1: Changing Pad Attachment and Use Parts and tools required to complete step. M4 Allen Wrench J. Changer Pad x 1 Supplied 1. Check that the bolt securing the strap is tight using M4 Allen Wrench. 2. Insert the strap through the hole in the Changer Pad (Part J). 3.
  • Page 22: Part

    Section 4: Step 2: Storing Instruction Booklet Parts and tools required to complete step. Assembly Instruction READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS Booklet DURING ASSEMBLY, KEEP OUT OF REACH OF Conforms to CHILDREN UNTIL ASSEMBLY IS COMPLETE.
  • Page 23: Part

    Section 5: Toddler Bed Conversion Step 1 Parts and tools required to complete step. M4 Allen Wrench Supplied Remove the (4) M6x45mm Bolts (Part BB) and (4) M4x30 Metal Pins (Part EE) installed in Section 2 Step 4 to remve the Crib Front Side (Part R) using the M4 Allen Wrench. The Mattress Support Must be in the lowest position.
  • Page 24 Section 5: Toddler Bed Conversion Step 2 WARNING: SEE PAGE 3 FOR TODDLER BED WARNINGS WARNING: THE STABILIZER BAR MUST BE USED TO AVIOD THE FORMATION OF A GAP BETWEEN THE MATTRESS AND THE BED THAT COULD CAUSE AN ENTRAPMENT. The Finished Toddler Bed can also be used as a Loveseat Sofa.
  • Page 25: Part

    Section 6: Full Size Bed Conversion Step 1 Parts and tools required to complete step. M4 Allen Wrench Supplied Remove Shelves and Shelf Clips. Disassemble the changer unit by reversing all steps in section 1: Changer Assembly.Remove the post from the Left Changer Side (Part A) by removing the bolts. Store all parts carefully for future use, see page 3 for information.
  • Page 26: Part

    Section 6: Full Size Bed Conversion Step 2 Parts and tools required to complete step. M4 Allen Wrench Supplied Disassemble the Crib End by removing the preassembled bolts with the M4 Allen Wrench. Attach the post removed from the changer in the previous step to the end of the Crib Back Side where it was previously attached using (2) M6x45mm (Part BB).
  • Page 27: Part

    Section 6: Full Size Bed Conversion Step 3 Parts and tools required to complete step. DD. M6 x 15 mm Bolt x 4 M4 Allen Wrench Supplied From Section 6 Step 2 Attach Bed Frame to the Headboard (From Section 6 Step 2) using (4) M6x15mm Bolts (Part DD). Follow all instructions supplied with the Bed Frame.
  • Page 28 Consumer Care: www.DeltaChildren.com Delta Children’s Products 114 West 26th Street New York, NY 10001 Tele.212-645-9033 Warranty: This Delta Crib is warranted to be free from defects for a period of 1 year from the date of purchase under normal use. This warranty extends only to the original retail purchaser and is valid only when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta.

Table of Contents

Save PDF