Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Delta Childrens Products Manuals
  4. Baby & Toddler Furniture
  5. Disney Princess 4-In-1 Crib
  6. Assembly manual

Delta Childrens Products Westin 4-in-1 Crib Assembly Manual

Hide thumbs Also See for Westin 4-in-1 Crib:

Advertisement

Quick Links

4 IN 1 CRIB
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
Consumer Care:
www.DeltaChildren.com
Delta Children's Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Conforms to
ASTM F1169-10a Full
Size Crib & F1821
Safety Standards
To register your product for important safety alerts and updates to your product please
visit www.DeltaChildren.com and click on Product Registration.
DECEMBER 8,2011,21095, R5
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
Style #:
___________
Lot:
___________
Date:
___________
When contacting Delta Consumer
Care you will need to reference the
above numbers. They can also be
found on the label on the the Left
Crib End Bottom Rail.
A
REV
FACTORY
©2011 DELTA ENTERPRISE CORP.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Westin 4-in-1 Crib and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Delta Childrens Products Westin 4-in-1 Crib

Summary of Contents for Delta Childrens Products Westin 4-in-1 Crib

  • Page 1 Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete. 4 IN 1 CRIB THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. Consumer Care: Style #: ___________...
  • Page 2 CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING 6 IN. WARNING: *Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
  • Page 3 TODDLER BED WARNING INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions. The maximum user weight is 50lbs (22.7kg) WARNING STRANGULATION HAZARD NEVER place bed near windows where cords from blinds or drapes may strangle a child.

  • Page 4: Table Of Contents

    P A R TS: MAKE SURE TH A T AL L PRE-ASSEMBLED P A R TS ARE TIGH T . C. RIGHT REAR LEG x 1 A. BACK RAIL x 1 Part # 21086 Part # 21084 E. RIGHT FRONT LEG x 1 Part # 21088 B.
  • Page 5 P A R TS: HARDWARE KIT IS PART # 21094 FOR COLOR 205 AND 233.SEE FRONT COVER. N. M6 x 90 mm BOLT x 4 No drills necessary. Do not Part # 5475 use power screwdriver. Flat Head Screwdriver (not supplied) P.
  • Page 6 STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP H. FRONT RAIL x 1 M4 ALLEN WRENCH SUPPLIED P. M6 x 70 mm BOLT x 4 D. LEFT FRONT LEG x 1 ATTACH (1) FRONT RAIL (PART H) TO (1) LEFT FRONT LEG (PART D) AND (1) RIGHT FRONT LEG (PART E) WITH (4) M6x70mm BOLTS (PART P) USING THE M4 ALLEN WRENCH.
  • Page 7 STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 1 M4 ALLEN WRENCH K. FRONT RAIL BOTTOM x 1 SUPPLIED S. M6 x 40 mm BOLT x 4 M. FOOT x 2 1. ATTACH (1) FRONT RAIL BOTTOM (PART K) TO THE ASSEMBLY FROM STEP 1 WITH (4) M6 X 40mm BOLTS (PART S).
  • Page 8 STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP C. RIGHT REAR LEG x 1 V . BARREL NUT x 4 M4 ALLEN WRENCH SUPPLIED PRODUCT LABEL WARNING LABEL W. M4x30 mm METAL PIN x 2 G. RIGHT CRIB END x 1 F.
  • Page 9 STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP FROM STEP 3 FROM STEP 2 M4 ALLEN WRENCH SUPPLIED T. M6 x 35 mm BOLT x 6 ATTACH THE ASSEMBLY FROM STEP 3 TO THE ASSEMBLY FROM STEP 2 WITH (6) M6x35mm BOLTS (PART T) USING THE M4 ALLEN WRENCH.
  • Page 10 STEP 5 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED U. M6 x 15 mm BOLT x 4 L. MATTRESS SUPPORT x 1 FROM STEP 4 ATTACH THE MATTRESS SUPPORT (PART L) IN ALL CORNERS USING (1) M6x15mm BOLT (PART U) IN EACH CORNER.TIGHTEN WITH THE M4 ALLEN WRENCH.
  • Page 11 STEP 6 PARTS AND TOOLS REQUIRED TO COMPLETE STEP A. BACK RAIL x 1 M4 ALLEN WRENCH SUPPLIED W. M4x30 mm METAL PIN x 2 V . BARREL NUT x 4 FROM STEP 5 N. M6 x 90 mm BOLT x 4 ATTACH (1) BACK RAIL (PART A) TO THE ASSEMBLY FROM STEP 5 WITH (2) M4x30mm METAL PINS (PART W), (4) M6x90mm BOLTS (PART N) AND (4) BARREL NUT (PART V) USING THE M4 ALLEN WRENCH.

  • Page 12: Part

    STEP 7 PARTS AND TOOLS REQUIRED TO COMPLETE STEP ASSEMBLY INSTRUCTION READ ALL INSTRUCTIONS BEFORE ASSEMBLY AND USE. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED DUE TO THE PRESENCE OF SMALL PARTS DURING ASSEMBLY, KEEP OUT OF REACH OF Conforms to BOOKLET CHILDREN UNTIL ASSEMBLY IS COMPLETE.

  • Page 13: Part

    STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED REMOVE FRONT RAIL INSTALLED IN STEP 1 AND 2 OF SECTION 1 CRIB ASSEMBLY.

  • Page 14: Part

    STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP J. STABILIZER BAR x 1 M4 ALLEN WRENCH SUPPLIED S. M6 x 40 mm BOLT x 4 FROM STEP 1 P. M6 x 70 mm BOLT x 2 ATTACH THE STABILIZER BAR (PART J) TO THE ASSEMBLY FROM STEP 1 USING (2) M6x70 mm BOLTS (PART P) AND (4) M6x40 mm BOLTS (PART S).
  • Page 15 STEP 2 WARNING: SEE PAGE 3 FOR TODDLER BED WARNINGS THE MATTRESS SUPPORT MUST BE IN THE LOWEST POSITION. STORE ALL HARDWARE SAFELY. READ ALL WARNINGS ON PAGE 3 AS SHOWN, USE AS A DAY BED OR LOVE SEAT SOFA. DO NOT USE WITHOUT STABILIZER BAR INSTALLED.

  • Page 16: Part

    STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 ALLEN WRENCH SUPPLIED YOU HAVE THE OPTION TO CONVERT THE CRIB TO A FULL SIZE BED. SIMPLY FOLLOW STEPS IN REVERSE ORDER TO DISASSEMBLE THE CRIB. REMOVE THE FRONT LEGS FROM THE LEFT CRIB END AND RIGHT CRIB END WITH THE M4 ALLEN WRENCH AS SHOWN.

  • Page 17: Part

    STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP U. M6 x 15 mm BOLT x 8 M4 ALLEN WRENCH FROM SECTION 3 STEP 1 SUPPLIED ATTACH BED FRAME TO THE HEADBOARD (FROM SECTION 3 STEP 1) AND FOOTBOARD (FROM SECTION 3 STEP 1) USING (8) M6x15mm BOLTS (PART U). FOLLOW ALL INSTRUCTIONS SUPPLIED WITH THE BEDFRAME.

  • Page 18: Part

    Consumer Care: www.deltachildren.com Delta Children’s Products 114 West 26th Street New York, NY 10001 Tele.212-645-9033 Warranty: This Delta Crib is warranted to be free from defects for a period of 1 year from the date of purchase under normal use. This warranty extends only to the original retail purchaser and is valid only when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta.

This manual is also suitable for:

7841
Save PDF