Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Delta Childrens Products Manuals
  4. Baby & Toddler Furniture
  5. 7040
  6. Instructions for use manual

Delta Childrens Products 7040 Instructions For Use Manual

4 in 1 crib
Hide thumbs

Advertisement

Quick Links

Download this manual
4 in 1 Crib
THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.
Consumer Care:
www.DeltaChildren.com
Delta Children's Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033
Conforms to
ASTM F1169-10a Full
Size Crib & F1821
Safety Standards
To register your product for important safety alerts and updates to your product please
visit www.DeltaChildren.com and click on Product Registration.
NOVEMBER 17, 2011, 22092, R0
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of
reach of children until assembly is complete.
Style #:
___________
Lot:
___________
Date:
___________
When contacting Delta Consumer
Care you will need to reference the
above numbers. They can also be
found on the label on the Crib End
bottom rail.
A
REV
FACTORY
©2011 DELTA ENTERPRISE CORP.

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7040 and is the answer not in the manual?

Questions and answers

Related Manuals for Delta Childrens Products 7040

Summary of Contents for Delta Childrens Products 7040

  • Page 1 Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete. 4 in 1 Crib THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. Consumer Care: Style #: ___________...
  • Page 2 CAUTION: ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING 6 IN. WARNING: *Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
  • Page 3 TODDLER BED WARNING INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions. The maximum user weight is 50lbs (22.7kg) WARNING STRANGULATION HAZARD NEVER place bed near windows where cords from blinds or drapes may strangle a child.
  • Page 4 PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT. A. Back Top Rail x 1 Part # 22088 D. Right Rear Leg x 1 C. Left Rear Leg x 1 Part # 22086 Part # 22085 BACK INSIDE BOTTOM LABEL B.
  • Page 5 PARTS: HARDWARE KIT PART #22091 FOR COLOR 205, 245 AND 645 OR #22093 FOR COLOR 209. SEE WARRANTY PAGE. K. M6 x 75 mm Bolt x 6 Part # 5472 No drills necessary. Do not use power screwdriver. L. M6 x 60 mm Bolt x 4 Part # 5469 Flat Head Screwdrive (not supplied)

  • Page 6: Section 1: Crib Assembly

    SECTION 1: CRIB ASSEMBLY STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP D. Right Rear Leg x 1 K. M6 x 75 mm Bolt x 2 S. M6 x 17 mm Barrel Nut x 2 BACK INSIDE BOTTOM LABEL M4 Allen Wrench Supplied B.
  • Page 7 SECTION 1: CRIB ASSEMBLY STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP From Step 1 K. M6 x 75 mm Bolt x 2 M4 Allen Wrench Supplied N. M6 x 50 mm Bolt x 2 S. M6 x 17 mm Barrel Nut x 2 A.
  • Page 8 SECTION 1: CRIB ASSEMBLY STEP 3 PARTS AND TOOLS REQUIRED TO COMPLETE STEP E. Left Crib From Step 2 End x 1 L. M6 x 60 mm Bolt x 4 S. M6 x 17 mm Barrel Nut x 4 PRODUCT LABEL LEFT INSIDE BOTTOM LABEL RIGHT INSIDE BOTTOM LABEL F.
  • Page 9 SECTION 1: CRIB ASSEMBLY STEP 4 PARTS AND TOOLS REQUIRED TO COMPLETE STEP P. M6 x 15 mm Bolt x 4 H. Mattress Support x 1 M4 Allen Wrench Supplied From Step 3 Attach the Mattress Support (Part H) in all corners using (1) M6 x 15 mm Bolt (Part P) in each corner. Tighten with the M4 Allen Wrench.
  • Page 10 SECTION 1: CRIB ASSEMBLY STEP 5 PARTS AND TOOLS REQUIRED TO COMPLETE STEP K. M6 x 75 mm Bolt x 2 S. M6 x 17 mm Barrel Nut x 2 FRONT INSIDE BOTTOM LABEL G. Front Rail x 1 From Step 4 M4 Allen Wrench Supplied Attach the Front Rail (Part G) to the assembly from step 4 using (2) M6x75mm Bolts (Part K) and (2) M6x17mm Barrel Nuts (Part S).
  • Page 11 SECTION 1: CRIB ASSEMBLY STEP 6 PARTS AND TOOLS REQUIRED TO COMPLETE STEP From Step 5 M. M6 x 55 mm Bolt x 4 R. Φ4x30 mm Metal Pin x 2 J. Stabilizer Bar x 1 M4 Allen Wrench Supplied Lay the Back Rail on the floor.
  • Page 12 SECTION 1: CRIB ASSEMBLY STEP 7 PARTS AND TOOLS REQUIRED TO COMPLETE STEP ASSEMBLY INSTRUCTION Read all instructions before assembly and use. KEEP INSTRUCTIONS FOR FUTURE USE. ADULT ASSEMBLY REQUIRED Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete.

  • Page 13: Section 2: Toddler Bed Conversion

    SECTION 2: TODDLER BED CONVERSION STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 Allen Wrench Supplied Finished Crib Remove the Front Rail and Stabilizer Bar intalled in Step 5 and 6 of Section 1 crib assembly.
  • Page 14 SECTION 2: TODDLER BED CONVERSION STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M. M6 x 55 mm Bolt x 4 J. Stabilizer Bar x 1 From Step 1 M4 Allen Wrench Supplied Attach the Stabilizer Bar (Part J) to the assembly from step 1 using (4) M6x55mm Bolts (Part M). Tighten with the M4 Allen Wrench.
  • Page 15 SECTION 2: TODDLER BED CONVERSION STEP 3 WARNING: SEE PAGE 3 FOR TODDLER BED WARNINGS The mattress support must be in the lowest positions. Store all hardware safely. Read all warnings on page 3. As shown, use as a day bed or love seat sofa. Do Not use without stabilizer bar intalled.

  • Page 16: Section 3: Full Size Bed Conversion

    SECTION 3: FULL SIZE BED CONVERSION STEP 1 PARTS AND TOOLS REQUIRED TO COMPLETE STEP M4 Allen Wrench Supplied You have the option to convert the crib to a Full Size Bed. Simply follow the steps in reverse order to disassemble the crib.
  • Page 17 SECTION 3: FULL SIZE BED CONVERSION STEP 2 PARTS AND TOOLS REQUIRED TO COMPLETE STEP P. M6 x 15 mm Bolt x 4 From Section 3 Step 1 M4 Allen Wrench Supplied Attach Bed Frame to the Headboard (From Section 3 Step 1) using (4) M6x15mm Bolts (Part P). Follow all instructions supplied with the Bed Frame.
  • Page 18 Style Number and Lot Number available. Use the space below to make note of those numbers. They can be found on the label on the Crib End bottom rail. STYLE No: 7040 COLOR Lot No. : _______________________...