Save this book and store any extra parts in a safe place in case you ever change your
configuration.
Configuring the 4.7GB SCSI-2 DVD-RAM Drive
To configure the DVD-RAM drive after installation, reboot your system unit. Device
drivers are provided in AIX and other operating systems that support the 4.7GB SCSI-2
DVD-RAM Drive. Your operating system should recognize the drive and should
automatically update your system unit configuration.
Verifying the Installation
See the instructions provided in your system unit documentation for verifying the
successful installation of the drive. To verify the installation on an AIX system, type:
lsdev -Cs scsi
at the system prompt, then press Enter. A list of SCSI devices displays. An Available
status indicates that the drive is installed and ready to use.
10
4.7GB SCSI-2 DVD-RAM Drive Installation and Using Guide